AMPTone1.par
5000.0 Stimulus carrier frequency (Hz).
200.0 Stimulus modulation frequency (Hz).
100.0 Stimulus percent amplitude modulation.
20.0 Stimulus signal intensity (dB SPL).
50.0e-3 Stimulus signal duration (seconds).
0.01e-3 Stimulus sampling interval, dt (seconds).
AutoCor1.par
# The autocorrelation is calculated backwards from the time, t0, for
# a period, t. An exponential decay function is included with the
# time constant, tw.
0 Normalisation mode standard or unity (0, or 1).
-1.0 Time offset, t0 (if -ve the end of the signal is assumed) (s).
2.5e-3 Time constant, tw (s).
7.5e-3 Autocorrelation period, t (s).
Average1.par
full Average mode specification (full, -wave or +wave).
0.0e-3 Time offset for start of averaging period (s).
-1e-3 Averaging period (s).
BPTone1.par
# Frequency Intensity
# (Hz) (dB SPL)
1000.0 20 Left stimulus.
1000.0 20 Right stimulus.
180.0 Phase difference between channels (degrees).
30.0e-3 Stimulus signal duration (seconds).
0.05e-3 Stimulus sampling interval, dt (seconds).
Click1.par
6.0e-3 Time for the delta-function click (s).
70.7 Stimulus signal amplitude (dB).
12.5e-3 Stimulus signal duration (seconds).
0.05e-3 Stimulus sampling interval, dt (seconds).
CrossCo1.par
# The cross-correlation is calculated fro -t to t from the time, t0.
# An exponential decay function is included with the
# time constant, tw.
15.0e-3 Time offset, t0 (s).
2.5e-3 Time constant, tw (s).
7.5e-3 Maximum lag period, t (s).
FindBin1.par
max_index search mode (MAX_VALUE, MAX_INDEX, MIN_VALUE, MIN_INDEX).
-1 Bin width (time window) for bin (s).
0.0 Time from which to start search (s).
-1.0e-3 Time range search (s).
FindInd1.par
maximum Index search mode ("minimum" or "maximum").
0.0e-3 Time offset for start of search (s).
GammaT2.par
4 Order for the gamma tone filters - basilar membrane model.
single Centre frequency mode for filter.
1000.0 Initial centre frequency of gamma-tone filter bank.
ERB Band width (3 dB down) mode for filters.
Histogm1.par
continuous Detection mode - spike (detection) or continuous (signal).
PH Histogram type - PSTH or PH.
0.5 Event threshold for bin counts (units as appropriate).
0.01e-3 Bin width for the histogram (s).
1e-3 Period for period histogram (s).
0.0e-3 Offset for period histogram (s).
Histogm2.par
continuous Detection mode - spike (detection) or continuous (signal).
PSTH Histogram type - PSTH or PH.
0.5 Event threshold for bin counts (units as appropriate).
0.05e-3 Bin width for the histogram (s).
1e-3 Period for period histogram (s).
0.0e-3 Offset for period histogram (s).
Intens1.par
0.0 Time from which to start calculation (s).
IntrSIH1.par
-1 Order of spike interactions (1 = 1st, 2 = 2nd, -1 = unlimited).
0.0 Event threshold (arbitrary units).
-1 Max. interval for inter-spike interval histogram (s).
MPTone1.par
3 Number of pure tones.
#
#Frequency Intensity Phase
#(Hz) (dB SPL) (degrees)
100.0 20.0 0.0 First pure tone.
200.0 20.0 0.0 Second pure tone.
300.0 20.0 0.0 Third pure tone.
#
100.0e-3 Stimulus signal duration (seconds).
0.25e-3 Stimulus sampling interval, dt (seconds).
PTone1.par
1000.0 Stimulus frequency (Hz).
20.0 Stimulus signal intensity (dB SPL).
50.0e-3 Stimulus signal duration (seconds).
0.05e-3 Stimulus sampling interval, dt (seconds).
PTone2.par
100.0 Stimulus frequency (Hz).
-40.0 Stimulus signal intensity (dB SPL).
4.0e-3 Stimulus signal duration (seconds).
0.01e-3 Stimulus sampling interval, dt (seconds).
PTone3.par
3000.0 Stimulus frequency (Hz).
-26.0 Stimulus signal intensity (dB SPL).
50.0e-3 Stimulus signal duration (seconds).
0.01e-3 Stimulus sampling interval, dt (seconds).
PTone4.par
1000.0 Stimulus frequency (Hz).
1.0 Stimulus signal intensity (dB SPL).
5.0e-3 Stimulus signal duration (seconds).
0.1e-3 Stimulus sampling interval, dt (seconds).
PreEmph1.par
4 Filter order.
450.0 Lower, 3 dB down cut-off frequency (Hz).
8500.0 Upper, 3 dB down cut-off frequency (Hz).
PulseTr1.par
360 Pulse rate (s).
0.1e-3 Pulse duration (s).
2.39 Stimulus signal amplitude (arbitary units).
20.0e-3 Stimulus signal duration (s).
0.1e-3 Stimulus sampling interval, dt (seconds).
SpikeRg1.par
0.0 Event threshold (arbitrary units).
0.2e-3 Bin width for spike events (s).
0.0e-3 Time offset for start of analysis (s).
-1 Max. time range: -1 = end of signal (s).
0.0 Refractory period or dead time - set to 0 for standard CV (s).
