IterRip1.par
2 Iterations number
IRSO Iterated ripple mode: "IRSO" - add original, "IRSS", add-same.
4e-3 delay (s).
-1 Signal multiplier (Gain).
Meddis86.par
100.0 Permeability constant A (units per second).
6000.0 Permeability constant B (units per second).
2000.0 Release rate (units per second).
5.05 Replenishment rate (units per second).
2500.0 Loss rate (units per second).
66.31 Reprocessing rate (units per second).
6580.0 Recovery rate (units per second).
1.0 Max. no. of transmitter packets in free pool.
50000.0 Firing rate (spikes per second).
PTone1.par
1000.0 Stimulus frequency (Hz).
20.0 Stimulus signal intensity (dB SPL).
500.0e-3 Stimulus signal duration (seconds).
0.25e-3 Stimulus sampling interval, dt (seconds).
PTone2.par
100.0 Stimulus frequency (Hz).
20.0 Stimulus signal intensity (dB SPL).
50.0e-3 Stimulus signal duration (seconds).
0.25e-3 Stimulus sampling interval, dt (seconds).
PTone3.par
1000.0 Stimulus frequency (Hz).
40.0 Stimulus signal intensity (dB SPL).
50.0e-3 Stimulus signal duration (seconds).
0.25e-3 Stimulus sampling interval, dt (seconds).
PTone4.par
1000.0 Stimulus frequency (Hz).
40.0 Stimulus signal intensity (dB SPL).
50.0e-3 Stimulus signal duration (seconds).
0.05e-3 Stimulus sampling interval, dt (seconds).
PTone5.par
1000.0 Stimulus frequency (Hz).
40.0 Stimulus signal intensity (dB SPL).
5.0e-3 Stimulus signal duration (seconds).
0.05e-3 Stimulus sampling interval, dt (seconds).
PTone6.par
5000.0 Stimulus frequency (Hz).
60.0 Stimulus signal intensity (dB SPL).
200.0e-3 Stimulus signal duration (seconds).
0.02e-3 Stimulus sampling interval, dt (seconds).
PreEmph1.par
1 Filter order.
0.0 Pre-attenuation for filter (dB).
0.0 Lower, 3 dB down cut-off frequency (Hz).
2000.0 Upper, 3 dB down cut-off frequency (Hz).
PreEmph2.par
2 Filter order.
0.0 Pre-attenuation for filter (dB).
450.0 Lower, 3 dB down cut-off frequency (Hz).
8500.0 Upper, 3 dB down cut-off frequency (Hz).
PulseTr1.par
360 Pulse rate (s).
0.1e-3 Pulse duration (s).
2.39 Stimulus signal amplitude (arbitary units).
20.0e-3 Stimulus signal duration (s).
0.1e-3 Stimulus sampling interval, dt (seconds).
PulseTr2.par
360 Pulse rate (s).
0.1e-3 Pulse duration (s).
2.39 Stimulus signal amplitude (arbitary units).
20.0e-3 Stimulus signal duration (s).
0.1e-3 Stimulus sampling interval, dt (seconds).
RedceCh1.par
#
# Parameter file for the AveChannels utility module.
#
Average Mode - "average" or simple "sum".
1 Number of channels signal is to be averaged to.
RedceDt1.par
#
# Parameter file for the ReduceDt module.
#
2 Reduction denominator.
Refract1.par
1.0e-3 Refractory period (seconds).
Sample1.par
3e-3 Time offset (s).
1.0e-3 Sampling interval (s).
SelecCh1.par
remove Selection mode - "zero" or "remove".
10 No. of frequencies to be selected.
# Selection array 0 = off, 1 = on.
1
0
1
0
1
0
1
0
1
0
ShapePu1.par
0.0 Event threshold (units).
0.2e-3 Pulse duration (s).
3.8 Pulse magnitude (nA?).
SimSpec1.par
# Misc. parameters.
on Diagnostics mode ("OFF" or "ON").
2.5e-3 Ramp rise time for stimuli (s)
# Module Specifications
begin {
Harmonic < Hrmonic1.par
Utility_SimulationSpec < SimSpec2.par
reset fibres
repeat 500 {
ANSpikeGen_Simple < SpikeGn1.par
fibres% Utility_Accumulate < dummy.par
}
Analysis_ACF < AutoCorr2.par
Display_Signal < Display1.par
}
- any old nonsense, as nothing else should be read at this point.
SimSpec2.par
# Misc. parameters.
on Diagnostics mode ("OFF" or "ON").
2.5e-3 Ramp rise time for stimuli (s)
# Module Specifications
begin {
PreEmphasis_BandPass < PreEmph2.par
BasilarM_GammaT < GammaT1.par
IHC_Meddis86 < Meddis86.par
}
- any old nonsense, as nothing else should be read at this point.
BPTone2.par
# Frequency Intensity
# (Hz) (dB SPL)
100.0 20 Left stimulus.
100.0 20 Right stimulus.
180.0 Phase difference between channels (degrees).
50.0e-3 Stimulus signal duration (seconds).
0.25e-3 Stimulus sampling interval, dt (seconds).
StepFun1.par
20.0 Stimulus signal amplitude (arbitary units).
10.0e-3 Stimulus signal duration (s).
10.0 Begin-end period amplitude (arbitrary units).
2.0e-3 Stimulus period before the signal begins (s).
5.0e-3 Stimulus period after the signal ends (s).
1.0e-3 Stimulus sampling interval, dt (seconds).
StepFun2.par
20.0 Stimulus signal amplitude (arbitary units).
100.0e-3 Stimulus signal duration (s).
0.0 Begin-end period amplitude (arbitrary units).
2.0e-3 Stimulus period before the signal begins (s).
5.0e-3 Stimulus period after the signal ends (s).
1.0e-3 Stimulus sampling interval, dt (seconds).
WNoise1.par
1 Number of channels.
-1 Degree of correlation between the noise at the left and right channels.
12 Randomization index.
-1 Randomization seed.
0.0001 Intensity (dB SPL).
10e-3 Duration (s).
0.05e-3 Sampling interval (s).
WNoise2.par
1 Number of channels.
-1 Degree of correlation between the noise at the left and right channels.
12 Randomization index.
-1 Randomization seed.
0.0001 Intensity (dB SPL).
50e-3 Duration (s).
0.1e-3 Sampling interval (s).
SpikeGn1.par
-1 Random number seed.
1 Number of fibres.
0.05e-3 Pulse duration (s).
1.0 Pulse magnitude (nA?).
1e-3 Refractory period (seconds).
Hrmonic2.par
# Stimulus generation parameters for a harmonic stimulus
100 Stimulus fundamental frequency (Hz).
1 Lowest harmonic number.
60 Highest harmonic number.
# Mistuning one harmonic
-1 Mistuned harmonic number (0= F0, -1 implies none mistuned).
40 Mistuning factor (%).
# Phase relationships among harmonics
sine Phase mode (SINE, COSINE, RANDOM, SCHROEDER, ALTERNATING).
1 Random number seed.
# Frequency modulation
2.5 modulation Frequency (Hz).
0 modulation Phase (degrees).
0 modulation Depth (%).
# Bandpass filter
0 Order
200 LowCutFreq 3 dB down
600 HighCutFreq 3 dB down
# Intensity, duration, dt
60.0 Stimulus signal intensity (dB SPL).
100e-3 Stimulus signal duration (s).
0.05e-3 Stimulus sampling interval, dt (seconds).
Delay1.par
#Delay1.par
# For binaural signals with +ve delays R is delayed relative to L (s).
SINGLE operation mode ("single" or "linear").
1e-3 Initial time delay (s).
3e-3 Final time delay (not used with "single" mode).
GammaTL4.par
4 Order for the gamma tone filters - BM model.
USER Centre frequency mode for filter.
2 No. of centre frequencies.
100
100
ERB Band width (3 dB down) mode for filters.
CBinITD1.par
#CBinITD1.par
2e-3 Inter-aural time delay: +ve R is delayed relative to L (s).
BPTone3.par
# Frequency Intensity
# (Hz) (dB SPL)
100.0 20 Left stimulus.
100.0 20 Right stimulus.
0.0 Phase difference between channels (degrees).
50.0e-3 Stimulus signal duration (seconds).
0.25e-3 Stimulus sampling interval, dt (seconds).
